Thermal insulation coating AT Termo®

16,49/liter 15,04/liter

Interested in a different color?

A unique product among insulating and protective materials, which works well both in the construction sector and in industry.

The AT Termo® thermal insulation coating combines the best of:

  • simple application – roller, brush or paint unit.
  • very good thermal insulation properties – 1mm layer corresponds to 10cm thick polystyrene
  • eco-friendly – water-based coating with low VOC content
kanister 20L attermo szpara fcom 2min

AT Termo®

in construction

Facade

AT Termo® is used to make both external and internal thermal insulation and protective coating in such facilities as:

  • rooms with high air humidity with a risk of mold and fungi appearance,
  • public utility facilities, hospitals, medical clinics and various types of offices,
  • historic buildings where, due to the complex shape of the façade, wool or polystyrene cannot be used,
  • any partitions made of brick, plaster or concrete

The product is ecological and safe for health, it allows to carry out works not only outdoors, but also indoors, while maintaining the basic principles of health and safety.

It is resistant to weather conditions and creates a friendly indoor climate.

It can be directly dyed in any color, or it can be applied to other products on the basis of an aqueous dispersion. The use of the AT Termo® material inside and outside the building allows you to maintain the volume of the room, enables insulation of facades with complex spatial architecture, improves thermal comfort in the rooms, and reduces expenditures for the duration of construction works.

The use of the coating in recreational facilities exposed to moisture, such as swimming pools or saunas, effectively eliminates the phenomenon of mold and fungus blooms, moreover, painted surfaces prevent the proliferation of harmful bacteria, such as staphylococcus aureus, E.coli coli or pneumonia bacilli.

AT Termo® is also used in thermal insulation of walls and various building partitions where the lack or insufficient amount of thermal insulation causes thermal bridges and, as a consequence, heat loss and often problems related to condensation of water vapor on such partitions.

AT Termo®

in industry

20181016 122844

AT Termo® is a coating that provides effective protection against frost penetration and surface water vapor condensation, and also solves the problem of thermal bridges. Recommended for insulation and protection of steel elements, such as:

  • hot and cold water pipelines,
  • sanitary fittings, valves
  • ventilation and air conditioning ducts, fittings and pipes,
  • roofing material,
  • tin garages,
  • shipping containers,
  • industrial installations, etc …

AT Termo® has high adhesion to metals without surface corrosion, and to most building materials. It is ecological and safe for health, which enables its use during outdoor and indoor works.

Our thermal insulation coating does not increase the load on the insulated structure and allows it to maintain its original size. AT Termo® coating, among others is used as thermal protection for electronics in specialized devices, where due to the small amount of available space, it is impossible to use traditional thermal insulation materials.

Technical Specifications

PackagingCanister (10L, 20L), Drum (200L), IBC (1000L)
Efficiency1L per 1m2 for 1mm coating thickness
Drying timefrom 2 to 24 hours
ColorWhite, tinted according to the FCOM color palette
ApplicationIndustry, Construction
Method of applicationroller, brush, paint aggregate
Maximum unit pressure120 bar
Thermal conductivity coefficient0.00032 W/(m*K)
Radiation Reflectance (TSR)90%
Operating temperature-140°C to 220°C
Warranty period10 years

Additional information

WeightN/A
Capacity

1 liter, 5 liters, 10 liters, 20 liters, 200 liters, 1000 liters

Color

White, FC01, FC02, FC03, FC04, FC05, FC06, FC07, FC08, FC09, FC10, FC11, FC12, FC13, FC14, FC15, FC16, FC17, FC18, FC19, FC20, FC21, FC22, FC23, FC24, FC26, FC27, FC28

7 reviews for Thermal insulation coating AT Termo®

Customer Images

Image #1 from Dariusz Nowakowski
Image #2 from Dariusz Nowakowski
Image #1 from Dariusz Nowakowski

Dariusz Nowakowski

Farba AT Termo- super kryje, nawet drobne pęknięcia i po miesięcznym ,,TEŚCIE SŁONECZNYM" (duża różnica temperatur między nocą a dniem) jest wszystko ok. Po 3 malowaniach wyszła fajna struktura na ścianie (delikatny baranek). Po pomalowaniu w słoneczny dzień na budynek możemy patrzeć tylko w okularach przeciwsłonecznych (kolor biały), a ściana ma niską temperaturę. Polecam wszystkim Tym którzy mają problem z popękanym tynkiem, bo można zastosować do większych pęknięć masę izolacyjną GO THERM (odpowiednio ją wcierając w szczeliny). Masę tą wykorzystałem również do tzw. startu (nie chciało mi się oklejać podbitki na dużej wysokości) naciągając ją za pomocą ,,Żylety" na szerokość ok. 40cm. A po wyschnięciu nałożyłem 3 warstwy farby nie siląc się na dokładne krycie przy podbitce, żeby jej nie pobrudzić. Polecam. Zadowolony klient :-)Ps. Zdjęcie w dzień trudno zrobić ale udało się przed wieczorem. Struktura powiększona. Plama na każdym zdęciu to efekt ,,dziobniętego " obiektywu w telefonie. Pozdrawiam . Dariusz Nowakowski

(1) (0)
Image #2 from Dariusz Nowakowski

Dariusz Nowakowski

Farba AT Termo- super kryje, nawet drobne pęknięcia i po miesięcznym ,,TEŚCIE SŁONECZNYM" (duża różnica temperatur między nocą a dniem) jest wszystko ok. Po 3 malowaniach wyszła fajna struktura na ścianie (delikatny baranek). Po pomalowaniu w słoneczny dzień na budynek możemy patrzeć tylko w okularach przeciwsłonecznych (kolor biały), a ściana ma niską temperaturę. Polecam wszystkim Tym którzy mają problem z popękanym tynkiem, bo można zastosować do większych pęknięć masę izolacyjną GO THERM (odpowiednio ją wcierając w szczeliny). Masę tą wykorzystałem również do tzw. startu (nie chciało mi się oklejać podbitki na dużej wysokości) naciągając ją za pomocą ,,Żylety" na szerokość ok. 40cm. A po wyschnięciu nałożyłem 3 warstwy farby nie siląc się na dokładne krycie przy podbitce, żeby jej nie pobrudzić. Polecam. Zadowolony klient :-)Ps. Zdjęcie w dzień trudno zrobić ale udało się przed wieczorem. Struktura powiększona. Plama na każdym zdęciu to efekt ,,dziobniętego " obiektywu w telefonie. Pozdrawiam . Dariusz Nowakowski

(1) (0)
Image #1 from Dariusz Nowakowski
Image #2 from Dariusz Nowakowski
1-5 of 7 reviews
  1. Po raz kolejny kupuję wasze produkty termoizolacyjne ,widzę i odczuwam efekt ich działania.

    (0) (0)
  2. właściwości termoizolacyjne bardzo dobre, natomiast krycie koloru bardzo słabe. Po 4 krotnym malowaniu wewnątrz nadal były różne odcienie na ścianie.

    (0) (0)
  3. Zatosowałem AT Termo do izolacji bramy garażowej od wewnątrz. Nie chciałem obciążać mechanizmu dodatkowymi kg od płyty PIR, i mogłoby wejść tylko 3cm.

    Struktura mi odpowiada po malowaniu wałkiem (baranek) – cały czas mówimy o bramie garażowej, która jest widoczna tylko dla mnie.
    W garażu jest cieplej, brama miała wysoki wskaźnik U przenikania ciepła, więc największa oszczędność na tym, niżbym przemalował ścianę, gdzie już mam 12 cm styropianu od zewnatrz.
    10L to za dużo wręcz, więc przemalowałem szpalery wokół okien – czuć dotykiem sporą różnicę. Resztę farby tak zamierzam wykorzystać.

    (0) (0)
  4. Nałożyłem powłokę termoizolacyjną natryskowo na sufit w domu jednorodzinnym (nie miałem możliwości innego sposobu docieplenia) wyszła bardzo ładna struktura. Od sufitu nie ciągnie chłodem, czekam na niższe rachunki

    (0) (0)
  5. Polecam

    (0) (0)
Add a review
Thermal insulation coating AT Termo® Thermal insulation coating AT Termo®
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review

Wybierz inny kolor NCS

Wypełnij poniższy formularz, aby otrzymać informację o możliwości zamówienia oraz wycenę dla innego koloru z palety NCS

Informacja kontaktowa
Informacja o kolorze

Choose a different NCS color

Fill out the form below to receive information about the possibility of ordering and a quote for a different color from the NCS palette

Contact information
Color information

Newsletter

Subscribe to the newsletter and receive a PLN 10 discount on your first order of a minimum value of PLN 100.