The GoTherm® primer is an acrylic resin-based priming emulsion that deeply penetrates the substrate, thus protecting weak and unstable surfaces and increasing their adhesion. Suitable for water-based thermal insulation paints, especially from the GoTherm® series, both on indoor and outdoor surfaces.
The preparation is used for impregnation and strengthening of cement, cement-lime, gypsum, gypsum cardboard, etc.
Priming should be carried out at the ambient and substrate temperature not lower than + 5°C. A roller or brush is used to apply the primer. The preparation should be used on a dry, dust, grease and dirt-free surface.
The primer is applied once, without diluting, to a dry substrate. In the case of unstable and very absorbent substrates, a second layer can be applied after 15 minutes.
The preparation efficiency is 20m²/liter, depending on the absorbency of the surface.